Regenerative thermal oxidizer (RTO)
          • Regenerative thermal oxidizer (RTO) Manufacturers, Regenerative thermal oxidizer (RTO) Factory, Supply Regenerative thermal oxidizer (RTO)
          • Regenerative thermal oxidizer (RTO) Manufacturers, Regenerative thermal oxidizer (RTO) Factory, Supply Regenerative thermal oxidizer (RTO)
          • Regenerative thermal oxidizer (RTO) Manufacturers, Regenerative thermal oxidizer (RTO) Factory, Supply Regenerative thermal oxidizer (RTO)

          Regenerative thermal oxidizer (RTO)

          Brand Baina

          Product origin Jiangsu Yixing, China

          Delivery time 8 weeks

          Supply capacity 10 sets/month

          1. Suitable for treating VOCs with mas volume and low concentration.
          2. Removal efficiency no less than 99%.

          Regenerative thermal oxidizer (RTO)

          1. Working principle

             There are three valves  under each regenerative chamber which switch VOCs in , exhaust out and purify air in. When RTO working the first regenerative chamber filled with ceramic that have absorbed heat, is used to preheat VOCs so that the temperature of VOCs could be reach to 650~750°C while which come into combustion chamber, so the VOCs can be easily heated to 750~850°C with little or without auxiliary fuel. After combustion the hot exhaust goes into the 2nd chamber and transmits heat to ceramic, and the temperature of ceramic in this chamber goes up while exhaust`s temperature cooled down and then directly emission into atmosphere. During above process, the 3rd chamber is purified,  the VOCs remaining in the ceramics are blown into the combustion chamber by fresh air for future combustion  or sucked to the inlet of the supply fan to be resend into RTO system for disposing again. 


          2. Application

           (1)RTO is suitable for low concentration and high volume of VOCs.


           (2)RTO can deal with the VOCs contained halogen, sulfur etc. If so, the corrosion resistance material need to be considered and the flue gas need to be washed before emission.


           (3)If the VOCs concentration is high, partial heat recovery shall be considered after the VOCs are oxidized, heat recovery method: Steam, hot water, hot conduction oil and hot air etc.


           (4)The following information is required for consultation: volume, temperature, pressure, composition, corresponding concentration of each component.


          Factory Show

          Production in workshop 2
          Team Service
          Provide professional training
          FAQ
          How to determine VOCs treatment process
          Depending on the Volume, composition, and concentration of the VOCs,if the volume is small (normally less than 10000Nm3/h) and concentration is high(Calorific value is more than 1000Kcal/Nm3), then the first choice is thermal oxidizer(TO). If the volume is large(more than 5000m3/h) and concentration is small (normally less than 5000mg/m3),then regenerative thermal oxidizer will be considered. If t...more
          Get the latest price? We'll respond as soon as possible(within 12 hours)

          Privacy policy

          close left right
          主站蜘蛛池模板: 鲜城| 沁水县| 汕尾市| 都兰县| 松潘县| 贵德县| 临泽县| 万载县| 娄烦县| 卢龙县| 凤阳县| 军事| 宿松县| 红安县| 三门峡市| 井研县| 恩施市| 公安县| 鄂伦春自治旗| 红原县| 安义县| 固阳县| 特克斯县| 牟定县| 陆河县| 青州市| 张掖市| 兴化市| 海原县| 莱阳市| 凤庆县| 四平市| 瑞金市| 夏河县| 宁安市| 蕉岭县| 梅州市| 宣威市| 徐水县| 陈巴尔虎旗| 富顺县|