Rotary regenerative thermal oxidizer (RRTO)
          • Rotary regenerative thermal oxidizer (RRTO) Manufacturers, Rotary regenerative thermal oxidizer (RRTO) Factory, Supply Rotary regenerative thermal oxidizer (RRTO)

          Rotary regenerative thermal oxidizer (RRTO)

          Brand Baina

          Product origin Jiangsu Yixing, China

          Delivery time 8 weeks

          Supply capacity 10 sets/month

          1. Suitbale for treating VOCs with mas volume and low concentration.
          2. Safe and stable operation and low energy consumption,RRTO occupy area is small。
          3. High removal efficiency, no less than 99%.

          Rotary regenerative thermal oxidizer (RRTO)

          1. Working principle

             Use one rotation valve to replace switch valves (inlet, outlet and backflush) of tanks, thus R-RTO works with much higher removal efficiency, lower energy consumption and higher safety than T-RTO. When RTO working the first groups/cabins filled with ceramic that have absorbed heat, is used to preheat waste gas so that the temperature of waste gas could be reach to 650~750°C while which come into combustion chamber, so the waste gas can be easily heated to 750~850°C with little or without auxiliary fuel. After combustion the hot exhaust goes into 2nd groups/cabins and transmits heat to ceramic, and the temperature of ceramic goes up while exhaust`s temperature cooled down and directly emission into atmosphere.


          2. Application

             (1) RTO is suitable for low concentration and high volume of VOCs.

             (2) RTO can deal with the VOCs contained halogen, sulfur etc. If so, the corrosion resistance material need to be considered and the flue gas need to be washed before emission.

             (3) If the VOCs concentration is high, partial heat recovery shall be considered after the VOCs are oxidized, heat recovery method: Steam, hot water, hot conduction oil and hot air etc.

             (4) The following information is required for consultation: volume, temperature, pressure, composition, corresponding concentration of each component.


          Factory Show

          Production in workshop 2
          Team Service
          Provide professional training
          FAQ
          How to determine VOCs treatment process
          Depending on the Volume, composition, and concentration of the VOCs,if the volume is small (normally less than 10000Nm3/h) and concentration is high(Calorific value is more than 1000Kcal/Nm3), then the first choice is thermal oxidizer(TO). If the volume is large(more than 5000m3/h) and concentration is small (normally less than 5000mg/m3),then regenerative thermal oxidizer will be considered. If t...more
          Get the latest price? We'll respond as soon as possible(within 12 hours)

          Privacy policy

          close left right
          主站蜘蛛池模板: 镇康县| 丹巴县| 大方县| 寻乌县| 镇平县| 漳平市| 黄龙县| 汤阴县| 松潘县| 玉田县| 黑龙江省| 蒙自县| 泽州县| 永安市| 旺苍县| 灵台县| 八宿县| 西乌| 长顺县| 古丈县| 灵宝市| 灌南县| 台东市| 乌苏市| 蒙山县| 长乐市| 荃湾区| 亚东县| 宁都县| 柯坪县| 屯昌县| 涞水县| 乐业县| 庆城县| 邳州市| 蓝山县| 荥经县| 疏勒县| 无极县| 依安县| 仙居县|